Adapter and Gaskets

As a reminder, please review the Getting Started information to see the product manual, how-to videos, and pump suggestions.

Sebba Shade needs to be inflated to about 6.5 PSI, but never more than 8.0 PSI. Any standard Stand Up Paddleboard (SUP) type of pump will work, however, you will likely need to attach the adapter that came with your Sebba Shade to the end of your SUP pump hose nozzle. 

Inflation Troubleshooting
If Sebba Shade does not inflate to a minimum of 6.5 PSI with your SUP pump, then air is likely leaking out of the the pump hose. 

Pay special attention to the inflation valve adapter and white rubber gaskets that came with your Sebba Shade purchase. Two small gaskets go inside the adapter and two large gaskets go on your SUP pump hose nozzle.

Adapter and gaskets:

Insert two small gaskets inside the adapter:

Two large gaskets go on the end of your pump hose:

If you have any questions about setting it up, we would be happy to walk you through it by phone or video chat. If you have misplaced the adapter or gaskets, let us know at
Sebba Shade - Getting Started