DEPLOYMENT PROTOCOL
120 Seconds to Total Coverage
Forget wrestling with heavy metal poles or fumbling with complicated hardware while the boat is rocking. The Sebba Shade was engineered for rapid deployment.
With our Zero-Trace Dyneema® rigging and high-pressure airframe, transitioning from the storage locker to 45-MPH stable shade takes less than two minutes. No tools. No drilling. No stress.
STEP 01 | INFLATION
Pressurize the Airframe
Unroll your Sebba Shade on the deck. Attach the included High-Pressure Dual-Action Pump to the primary valve.
Inflate the canopy until the integrated gauge reads exactly 8.0 PSI.
This is the "Sweet Zone" where the AeroCasing™ Exoskeleton and TPU Core lock together, creating an aerodynamic structure rigid enough to withstand wide-open throttle.
STEP 02 | BASE RIGGING
Secure the Anchor Straps
The Sebba Shade requires only 2 to 4 connection points. Take the Boat Side of your two-part straps (the heavy-duty polyester webbing with the looped end).
Wrap and loop these securely around your existing T-top, Bimini frame, or tower. These act as your primary anchors, providing a rock-solid foundation without ever scratching your gelcoat or requiring drilled hardpoints.
STEP 03 | ENGAGE & TENSION
Lock it Down. Throttle Up.
Take the Shade Side of the strap—featuring the low-stretch Dyneema® cord—and lock it directly into the airframe. The AeroCasing™ features 16 strategically placed Dyneema® pigtails, allowing you to effortlessly shift the canopy to block the moving sun.
Once attached, clip the Boat Side and Shade Side straps together at the central buckle and pull the webbing to cinch.
Deployment Protocol: A minimum of two straps must be fastened while anchored. All four straps must be locked and tensioned to engage the 45-MPH Underway Configuration.
STRIKING THE RIG
Pack Up in 60 Seconds
When the day is done, the teardown is just as effortless. Simply unbuckle the straps and open the high-flow deflation valve to instantly dump the air.
Roll the flexible canopy up and slide it into the included Heavy-Duty Marine Duffel. It stows easily in any standard deck locker—leaving your boat completely unobstructed.
OFFLINE RESOURCE
The 120-Second Blueprint
Download the official Quick Start Guide. Optimized for offline use at the sandbar or offshore, this manual provides step-by-step visual instructions to ensure you hit the 8.0 PSI Sweet Zone and lock in your Dyneema® rigging correctly, even without cell service.
Download PDF Manual45 MPH Underway Deployment: The T-Top Configuration
While the Sebba Shade can be loosely strapped in for stationary lounging in almost any configuration, achieving high-speed stability requires a precise, high-tension setup.
To lock the canopy into its aerodynamic underway position, you must utilize specific pigtail connections on the AeroCasing™. This specific rigging technique allows you to safely cantilever the shade over the aft of your vessel while keeping the leading edge pinned down to seamlessly slice through the wind.
Forward pigtails
Forward straps
Rear pigtails and straps